The dreaded oil pressure light...definitely the light I do NOT want to see. This can cause the most damage in the fastest way and kill the engine. So I found a real easy way to fix this problem.
SUPPORT MY CHANNEL FOR "FREE" - visit amazon through THIS LINK (or any link on my channel)
*** https://amzn.to/2SLOzgI ***
and I'll get a small percent of whatever you buy from them. Costs you nothing. Thanks guys!
i simply drain out the oil and I
take this pick and I start to feel
underneath the oil filler tube. Then i
use a toothbrush and I get in there and
i scrub that screen really good. So then
what I do is I close it all up then I'm
going to take off the oil filter and
put a tube right in the center of the
where the oil filter goes. Ok now what
I'm going to do is I take some clean
kerosene and I go ahead and I get a pump
and I start pumping it through this tube
from where the oil filter was
connected. And this is going to push more
kerosene down onto that screen
go ahead and pour more down the oil and
then in the morning
go ahead and dump out that kerosene and
you're going to see a lot of grit come
out and because of the night of soaking
this is really going to help clean it.
Now this is the grit that's the problem
and this is causing that low oil
pressure. So this was truly a quick fix
I mean usually it's like two to three
days because the oil pan off so 20
minutes doing this
that's great. So go ahead and put the oil
back in the car and at this point go
ahead and turn on the car and there's no
oil light so everything seems to be
working great. So if you like what I've
got here please like and subscribe.
